Hi Brenda,
I have seen the foot in action but only on photos, it very much looks like the # 96 Q, I mean it has no spring as the other from Janome has, but it must be a little smaller or shorter because it is adapted for all the BERNINA domestic machines, as soon as I have more informations, I shall tell you.

Chantal, do you know how it is different from the #96 foot for the Q Bernina machine? Et mille mercis pour cette information

Hello,
I have good news about the BERNINA ruler foot. A ruler foot has been now finallized, The number is 96 ruler foot for domestic machines, it will be available in USA very soon, you can maybe already ask your BERNINA dealer, by specifying it is the new 96 foot for domestic machines and not the one for the Q BERNINA machine. In Europe this foot will be available later on, fall (automn) 2016. Have a nice quilting.
Chantal

Hello,

I have good news, my friend is working for Bernina Switzerland, she received a mail from Bernina " Info Gate", this type of information is given to all Bernina's agents and dealers, she showed me this mail, it is saying : the Long arm foot N°96 should not be used at all for domestic sewing machines as it can make severe damages to the machine BUT They are working in making a special ruler foot for domestic machines, they are not saying when this foot will be available but. as soon as my friend has this information, I shall give it to you.

I haven't tried the foam core, but I would think you would also want to put some little sand paper dots or silicon stickers on the bottom since it seems like the foam corewould slip a lot.

I ordered quilt foot from store in US that carries the Westalee ruler foot and it came as pkg. deal that included a couple of rulers. Check with your bernina dealer, but they ordered me the low-shank adapter #77.

Also, watched lass on Craftsy where hey talked about making your own ruler any shape or size you want by creating template out of foam board. I believe you should use 2 layers of foam board glued together. Then use push pins glued in place for handles. I really love this idea. I'm thinking paw prints to start with.

I ordered quilt foot from store in US that carries the Westalee ruler foot and it came as pkg. deal that included a couple of rulers. Check with your bernina dealer, but they ordered me the low-shank adapter #77.

I ordered the foot last month from a nearby shop and got the foot today. It works great!

I found it at the Cotton Patch in Lafayette CA

Where did you buy it? shop and city...Meissners in Sacramento...a large store cannot order it for me and doesn't have one available. Thanks for your help with this.

You want to use the 1/4" longarm rulers. Otherwise the ruler will slip under the foot and cause major problems. Of course, I'm still talking Berning which has a hopping foot. If your machine has a foot that doesn't hop, I've heard you can use thinner rulers. But I have not experience with that myself.

What height rulers are you using?

I got my 96 foot and tried it out a little bit. It is great!!!

I got the #96 foot for my Bernina 770. I just didn't tell the shop that it was for my domestic so I wouldn't get a lecture. It works great! Like someone mentioned earlier on this topic, you just have to be careful to always drop the foot before dropping your needle since the needle bar will hit the foot if the foot is up when you drop the needle. I just did some 1/16" and 1/8" straight line quilting on a wallhanging using Lisa Calle's rulers and this foot and it worked great! Just got a little pain in my wrist from holding the ruler down. This was my first try at ruler work with my Bernina, so hopefully I'll figure out a better way to hold things as I do more. Enjoy your foot once you get it!