Welcome, Guest
Username: Password: Remember me

TOPIC: Sewing over pins

Re: Sewing over pins 08 Aug 2010 05:26 #48817

  • dwynette
  • dwynette's Avatar
  • OFFLINE
  • Posts: 75
  • Thank you received: 7
I accidentally sewed over a pin with my Bernina. It knocked the machine out of time. I had to take it in to get it fixed.
The administrator has disabled public write access.

Re: Sewing over pins 25 Jul 2010 17:37 #48435

I don't usually sew over them but once I hit one and the fine pin broke and the end went into my cheek. I am now very careful even though it was a freak incident. At least it missed my eye.
The administrator has disabled public write access.

Re: Sewing over pins 24 Jul 2010 11:07 #48399

I just had problems with my machine. When I took it in for repairs, the first thing they said was that I had gone over pins and as a result the machine was out of timing. As it turned out they had to replace position brackets in the bobbin area. Whether the damage was the result of hitting pins or not, I'm not sure, but for the costs of repair I will make every effort not to sew over pins.
The administrator has disabled public write access.

Re: Sewing over pins 24 Jul 2010 03:02 #48385

I only do it by accident. It ruins my fine pins so that they bend or subsequently snag the fabric and I go through enough machine needles as it is!

From Dorset, England
The administrator has disabled public write access.

Re: Sewing over pins 22 Jul 2010 05:43 #48330

I rarely sew over a pin-if I do I'm walking the machine by hand. Why take a chance?
The administrator has disabled public write access.

Re: Sewing over pins 21 Jul 2010 16:39 #48298

  • PDQuilt
  • PDQuilt's Avatar
  • OFFLINE
  • Posts: 514
  • Thank you received: 2
Always have. Never any problems - I think instinctively you slow down. But NOW, I am glueing more, and pinning less. In really hairy situations, I've been known to hand-tack the intersection. (Shhhhhh..) I suspect that Elmers hasn't figured out that their probable jump in sales is due to us quilters - when they catch on, they will probably change the label to something quilty, and then quadruple the price, on smaller bottles, of course. Really - try the glue. :D
The administrator has disabled public write access.

Re: Sewing over pins 21 Jul 2010 14:29 #48297

I DO sew over pins - but that said, my machine had to go back to where it was born - at least to Chicago. The needle broke in half and got jammed down into the bobbin area. SO - here is my advice.....
1. use extra fine pins
2. pin UNDER where the 1/4"seam is
3. and SLOOOWWWWWWWW down

Perhaps it is not as dangerous texting and driving - but at least these tips will give you a fighting chance.
The administrator has disabled public write access.

Re: Sewing over pins 21 Jul 2010 12:26 #48295

  • ladyquilter
  • ladyquilter's Avatar
  • OFFLINE
  • Posts: 754
  • Thank you received: 37
I try to never do it because it tends to bend the thin pins that I use and I always fear that it will damage the machine. I have watched professionals however do it and what they said is that if you go 'really slowly' there is less chance of a needle breaking or causing damage.

aka ladyquilter

Troutdale, OR
<!-- m --><a class="postlink" href="www.sweetpeaz.com/wordpress">www.sweetpeaz.com/wordpress</a><!-- m -->
The administrator has disabled public write access.
Time to create page: 0.209 seconds
Powered by Kunena Forum