|
Welcome,
Guest
|
|
 |
|
Congratulations on your new machine. Happy sewing.
 |
 |
|
|
|
|
|
|
|
I'm TOTALLY a Bernina fan, absolutely. I have um, several, including a 630, 820, and 1030 (my three favs). But...I highly recommend that you test drive the 8900 and a 7 series machine before buying. I would only buy a 7 series if I were able to exhaustively test drive the actual machine I would be getting AND if the dealer agreed to promptly repair the machine in case of any troubles and replace the machine or refund my money in case of the 3rd major issue.
I recommend you read the discussions on Pattern Review. Some new owner of the 7 series have had serious issues. Most dealers have promptly repaired and/or replaced defective machines, some have been resistant. I have total confidence in Bernina to "make it right", but then, I live within driving distance of Bernina USA in Aurora, IL  I think they will work out the bugs, as they did with the 8 series (my 820, made in 2011, has been fabulous and trouble-free). I really wish they would get it right before releasing new models, as it's not fun reading about the trials and tribulations of fellow sewists.The 8900 has several upgrades/solutions to minor issues on the 7700. The 7700 also had issues when it came out, and a friend of mine had hers replaced when she finally contacted Janome USA after her dealer left her hanging. She's now thrilled with her 830. I think both brands are very good quality. If I didn't already have plenty of machines, not to mention an abiding love for Bernina presser feet, the foot controller, and my Bernina dealer, I would definitely test drive an 8900 and a Pfaff Creative Performance (which is available with or without emboirdery, with two module sizes) before buying a 7 or 8 Series Bernina. Just my opinion... |
|
|
|
|
|
|
 |
|
Terrie I don't have much to complain about with my Janome Horizon but with the newer models they are making it easier to use the acufeed system (this is the equivalent of a walking foot on other machines); a 9mm stitch width and elongation of stitches (at the moment certain stitches can be elongated but not by very much - the 9mm stitch width should help with that too.) They seem to have changed the single hole needle plate thingy too - now it seems to be a different plate that just snaps in and out of place. The 11" harp space is already there and is wonderful when quilting a quilt and the large extension table is something I always have in place. I really love my machine (Patricia) and wouldn't want to replace her....but I might consider getting the newer one as well if i could sneak it in under the radar.
  If you google Janome Horizon 8900 you will see the features of it. Mine is the 7700. Hope that helps. |
|
|
|
|
|
|
 |
|
|
|
|
Hi happystitcher and welcome to the forum! I don't have either of those machines but I do have the Janome Horizon 7700QCP and I can tell you that it is a beautiful machine. The one you are thinking of is the newer version of this (I think?) and has some of the minor irritations with my one sorted out. It is wonderfully smooth for free motion quilting, piecing is smooth, the decorative stitches are lovely and I really can't complain about it at all. I am sure you will get good reviews of the Bernina too. For me though a big deciding factor was how I would be able to get it serviced as we don't have a reliable Bernina dealer near where I live. Good luck with your choice. And HAPPY EASTER!
|
|
|
|
|
|
