I agree with the authors above. It seems that the instruction should be written for ordinary readers, but I've read it several times already and I can't understand what the point is.

Thanks for that!)

Where are the lenses of glass bubbles located? I have a Bernette London 8 and I am having the same problem when making button holes!

I was having trouble with the auto buttonhole foot on my Bernina 640. The problem was solved when I removed the foot & wiped off the little glass "bubble" on top. Must have had a fingerprint or something on it, that was interfering with it.

Mamas, they should have you writing the technical instruction book. Thank you.

I am a guide teacher for the Bernina machines and can give you instructions. Hope it will help. If you are using the long black button hole foot it will remember the length and you will be able to make all of your button holes exactly the same length. Mark the length of the first button hole, put the needle just to the left at the top of the buttonhole. The first bead or row of stitches will go down the left side so we position the needle about 2 threads to the left of center. When you come to the bottom of the buttonhole (the length you want ) push the quick reverse button just over the needle. The machine will automatically go to the top on the right side, bar tack at the top and come down on the right side, bar tack and stitch to lock your stitches. Some machines are different and the quick reverse button might not work but your book should tell what to push to do the same thing. There is a no. 3 regular foot that usually comes with the machines. That will require you to push the icon to put it into memory. Let me know what machine you have and if you have any more problems let me know. I guess I should start at the beginning on this buttonhole project. First push the buttonhole icon on the front of the machine. Select the type of buttonhole you want. The first one is the usual one. The one next to it is a finer for delicate fabrics or baby clothes. The key hole ones are for heavy shanks on the button and the others are decorative. Once you select your buttonhole proceed with the direction above. If you continue with problems you can call me and I will try to walk you through the steps. My phone no. is 423-344-8118. Hope this helps. Marilyn Geraldson (Mamas)

I agree with Sue in the last comments. If there is a bulky seam near, the automatic buttonhole foot may be getting hung up so the alternative is that you may have to mark the stop and start of the buttonhole and use the regular buttonhole foot.

QuilterMomma wrote:
Which foot are you using?

So, after you program the first one, on the 2nd, is the machine not stopping when sewing the first bead? Could you please give a little more description of what is going on?

Sometimes, just getting a consistent even layer to stitch through affects the consistence of automatic buttonholes, if the foot is not supported evenly on both sides, things get screwy

But if you're not even getting close, it's in the initial setup.

I would not try this on my project until I had this down pat. In working on a sample, try to use the same fabric, interfacing and seams as the project.

Please feel free to email me a picture of what's going on!

You are not alone. I have a Bernina 440 and could never get the buttonhole maker to work no matter how many times I read the instructions. Now, if I want to make a buttonhole, I either use a small zig-zag stitch or my portable simple singer.

Can't imagine what the problem is...may be time to take it to a Bernina dealer and see if they can figure it out.

The artista is a Bernina, I believe. Don't know what could be the problem.

That's not a machine I'm familiar with. Anyone out there know what the problem could be???

It is the Artista 165, came out in 2001 I believe. I bought on close out from dealer in 2006. It is a domestic machine.

What kind of machine/buttonhole maker are you using? A domestic machine? New or antique? Brand?