0

fShare

Tweet

Did you know that you can run fusible web through your printer?  That's right, if you have an ink-jet printer, you can put an 8 1/2" x 11" sheet of fusible through the printer.  This way you can copy your designs right onto the fusible.  No more tracing!

The trick is to attach the sheet to a regular piece of paper using double- sided tape.  You don't need much, just tack down the corners.  Then, go ahead and print away.

DO NOT DO THIS IF YOU HAVE A LASER  OR THERMAL PRINTER.

YOU'LL GET A GLUEY MESS!