Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: How can I "waxproof" a work apron.

Re: How can I "waxproof" a work apron. 17 Dec 2011 08:12 #72282

  • Renata
  • Renata's Avatar
  • OFFLINE
  • Posts: 2673
  • Thank you received: 260
Dawn,
I just realized in my previous post I did not offer the reason I made the recommendation. Good spray-on repellents can work but all depends on the fabric you are spraying it on. Repellents protect the fiber itself but you still have to consider the space between the fibers, which repellents have no effect on. So, if the fabric is relatively porous, you might protect the fabric from penetrating the fibers, but not between the fibers. If the fabric is pretty dense, your repellent might provide better coverage. Some industrial aprons are lined with cotton duck to provide better coverage, yet breathability. I'm not sure exactly what the intended purpose of your apron will be. Metal casters, for example, often use leather aprons, which provide some breathability, flexibility, less penetrability and more safety protection.
Cheers and hope you find something that will work for you! Renata

The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 17 Dec 2011 07:34 #72279

  • Sewdreamy
  • Sewdreamy's Avatar
  • OFFLINE
  • Posts: 2009
  • Thank you received: 160
I have an idea...how about tent and camping gear waterproofing. I have not used this particular brand, but I found this link that says it also helps against oil:

http://www.google.com/products/catalog?q=tent+waterproofing&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=2331944550379188267&sa=X&ei=1JnsTtvMO6Pr0gH-4fGkCQ&ved=0CIsBEPMCMAA

If the link doesn't work, I just googled "tent waterproofing"

Hope that helps.

"Neglect not the gift that is within you..." -1 Timothy 4:14
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 17 Dec 2011 05:34 #72278

  • Renata
  • Renata's Avatar
  • OFFLINE
  • Posts: 2673
  • Thank you received: 260
I could not think of anything that you could coat denim fibers with so that wax would stay on the surface. The problem is that denim is relatively porous so even scotchguard would not prevent wax from soaking through your apron. For a little better protection, I would recommend lining your apron with something like cotton duck (there are some lighter weights out there than the typical canvas), because it has a tighter weave than denim. The wax, even if it soaks through the denim, is unlikely to go through the second layer because the heat of molten wax dissipates as it hits the air. The lining will give you a little better protection and will still make your apron breathable. The only thing I think you can do for the wax on your apron is to put ice on the wax to freeze and it will pop off a little easier. I know this does not give you exactly what you are looking for but it may be an alternative in case you don't find the ideal solution.
Renata

The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 22:53 #72277

Scoopie wrote:
Thank you Margo and Michelle! But, I really want something that soaks into the fibers of the denim, so that the apron can still "breath." Wearing an oilcloth, or vinyl coating for 8 hours would be too warm, and I'm afraid the hot wax might melt it. This is to be an all day apron, not a 2 or 3 hour hobby apron.

Dawn
In beautiful Northwest Montana
What about the wax that is used on Barbour coats? It soaks into the fibers.The jacket remains flexible but is resistant to wind and rain. I don't know how it would work on an apron.


Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 21:34 #72275

  • Margo
  • Margo's Avatar
  • OFFLINE
  • Posts: 6522
  • Thank you received: 129
Yes! Inquiring minds want to know!

Maybe Scotchguard would be the answer after all? Try treating a small piece of the denim and see how it works.

I can tell you that Scotchguard on denim pants is NOT effective when you are putting together a ski outfit on the cheap! I fell at the top of the hill and my pants were so slick I couldn't stop sliding until I got to the bottom!! But....I did stay DRY! :roll:


It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 21:03 #72273

I don't know where or how you'd get this, but it sounds like teflon is what you need! Perhaps there is some way to paint the apron front with teflon? Just brainstoming here...


BTW, what are you doing that you're in need of a wax and goo proof apron for 8 hours a day? Inquiring minds want to know...!!
Michelle Wyman
Acworth, GA
A1 Elite Longarm with IQ
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 20:55 #72272

  • Scoopie
  • Scoopie's Avatar
  • OFFLINE
  • Posts: 1149
  • Thank you received: 160
Thank you Margo and Michelle! But, I really want something that soaks into the fibers of the denim, so that the apron can still "breath." Wearing an oilcloth, or vinyl coating for 8 hours would be too warm, and I'm afraid the hot wax might melt it. This is to be an all day apron, not a 2 or 3 hour hobby apron.

Dawn
In beautiful Northwest Montana
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 17:56 #72267

How about an apron made from the new funky oilcloth that is popular now? It's fabric with a slick finish on the outside. It's great for totes, but might work for an apron.
Michelle Wyman
Acworth, GA
A1 Elite Longarm with IQ
The administrator has disabled public write access.

Re: How can I "waxproof" a work apron. 16 Dec 2011 17:39 #72265

  • Margo
  • Margo's Avatar
  • OFFLINE
  • Posts: 6522
  • Thank you received: 129
Dawn, I don't know how it would work with wax, but you might want to try some fusible vinyl. I found some at the local Jo Ann's.

http://www.thermowebonline.com/dyn_prod.php?p=3902&k=82331


It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
The administrator has disabled public write access.

How can I "waxproof" a work apron. 16 Dec 2011 16:44 #72262

  • Scoopie
  • Scoopie's Avatar
  • OFFLINE
  • Posts: 1149
  • Thank you received: 160
I am making a work apron out of denim. The work being done is quite messy and gets hot wax splattered everywhere. Is there something I can apply that will work as a "shield" from wax, slime and goo? I know about Scotchguard, but was wondering if anyone has heard of some new, wonderful, magical substance that I can just spray on, or dip the apron into, so that the wax does not penatrate and can just be flicked off.

Dawn
In beautiful Northwest Montana
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.225 seconds
Powered by Kunena Forum